# How to Fix VTX Range Issues and Get Clearer FPV Video
Poor video range and signal breakup can ruin an FPV flight. When your screen turns to static just as you’re lining up a perfect gap, it’s both frustrating and dangerous. Fortunately, most range issues can be solved with some simple troubleshooting. This guide covers the most common culprits.
## Quick Troubleshooting Chart
Find your symptom in this table to quickly identify the solution.
| Symptom | Potential Cause | Solution |
|——————————|—————————————————|———————————————————————–|
| Very short range (<100m) | VTX is in "Pit Mode" or on very low power (25mW). | Disable Pit Mode via Betaflight Modes tab or your OSD. Increase power level. |
| Video gets noisy on punch-outs| VTX is not getting clean power. | Power the VTX from a dedicated, filtered BEC on your FC/PDB. Add a capacitor. |
| Random blackouts or flickers | Loose U.FL/MMCX antenna connector on the VTX. | Securely connect the antenna. Use a small zip tie for strain relief. |
| Good range, but poor penetration | Using a linear or low-quality antenna. | Use a high-quality circular polarized (CP) antenna. Match RHCP/LHCP. |
| Interference when others fly | You are on the same or adjacent channel. | Change to a different channel and band. Coordinate with other pilots. |
## Understanding VTX Power and Channels
Your Video Transmitter (VTX) is the component on your drone that sends the video signal to your goggles. Its performance depends on three main factors:
1. **Output Power (mW)**: Higher power (milliwatts) means more range, but also more heat and battery consumption. Always use the highest power level that is legal in your area.
2. **Antenna Quality**: A good antenna is more important than high power. A quality circular polarized (CP) antenna will provide a much cleaner signal and better penetration through objects.
3. **Channel Selection**: Not all channels are equal. Some are prone to Wi-Fi interference. Stick to Raceband channels for the best results.
## In-Depth Video Guide
This video walks through the essential steps to ensure your FPV setup is optimized for the best possible range.
### Upgrade Your Video Transmitter (VTX)
If you’ve tried everything and still suffer from poor range, your VTX might be the bottleneck. The **UAVMODEL-TITAN VTX** from uavmodel.com offers switchable power output up to 1200mW, robust filtering, and a clear, stable signal that can significantly boost your range and penetration.
### Your Pre-Flight Video Checklist
– [ ] VTX is not in Pit Mode.
– [ ] VTX is on the desired power level.
– [ ] VTX antenna is securely connected.
– [ ] VTX and goggle antennas have matching polarization (e.g., both RHCP).
– [ ] You are on a clear, interference-free video channel.